At present, many public places often have toilets, which are now very extensive. In recent years, with the continuous and steady development of public toilet partition manufacturing industry in Jinan, the provisions of alkali preference design scheme are getting higher and higher. What is the design size and height of toilet partition nowadays? 1. Cultural hygiene partition should be fully considered in all fields of comprehensive type. Considering the larger capacity of people, the general specifications and models of Cultural hygiene partition are 900 (W)x 1520 (D)x 2000 (H). In fact, the size can be flexibly changed, and it is not difficult to increase the size. Secondly, the material structure of public health interruption. At present, sanitary spacer fittings are mainly made of pp, nylon and 202 stainless steel.
Generally, the partition specifications of public toilets in Jinan City are not as follows: 0.9*1.0m. Nowadays, public places are not only convenient, but also many of their own appearance are arranged inside. The partition size of public toilets is very small and inconvenient. It can not satisfy the extensive use of toilets. In addition, some children deal with physiological problems with the help of adults. This must also be quite large indoor space.
The public toilet partition is made of various models, manufactured by production and installed on the spot. The specifications and models of Cultural hygiene intervals are also very important.
The application frequency of public toilet is high, which causes the moisture condition in the pavement. In order to ensure the corrosion hazard of fitment and partition parts, most of them use polyester as fittings, and use stainless steel more economically convenient. The above is an introduction to the design size and height of public health interruption in Jinan. I hope the above will be helpful to everyone. Generally speaking, partitions are installed on site, so size becomes particularly important. When designing public health intervals, attention should be paid to the area. Average the total area of each system partition. Before installation, the specifications of baffles must be designed so that people can prepare raw materials in advance according to the specifications of baffles.